Using a Pedestrian Traffic Light in India, Step by Process.

Navigating the chaotic streets in India is always so overwhelming, especially if you are walking. Knowing how to use pedestrian traffic lights is important because of this. These lights are there to ensure pedestrians cross the road safely by indicating in time as when they should walk and when not. Today, in this article we are going to tell you how a pedestrian traffic light works in India.

1: Pedestrian Traffic Light Position in the Australia

Firstly, you need to find the pedestrian traffic light These are the lights you normally find at high trafiic intersections and crosswalks. There is usually a push-button request on the pole to let drivers as well as pedestrians know that you want to cross. These could also include border works on road or painted mark-up of crossing stripes.

2: Push the button if you have this.

When you have found the pedestrian light, find a knob nearby. It seems to be a place for you, the pedestrian waiting at the crossing. Pressing the button sends a request to the traffic control system for an additional pedestrian crosswalk light cycle. Sooner or later, the system will recognize you and show the “walk” signal for you.

3: Waiting for Walk Signal

Thus, after pressing the button it is important to wait for an indication that pedestrian light has changed. Time of wait may differ per cycle on the traffic lights. For now, be patient and keep eyes open. A red “don’t walk” signal appears, signaling that it is not safe to cross the street. In the meantime, watch and wait for traffic to clear.

4: Wait for the Green Light before Crossing

The pedestrian walk light turns green so you can cross. This is the green light with a walking figure icon. Check both sides of the road and make sure all vehicles have stopped before starting to cross. Secondly, cross the roadway cautiously and quickly to your right side where a marked crosswalk is located.

5: Be prepared while crossing.

Even when the signal is green one must look for both sides to cross the street. Look for cars that might have missed a stop, especially turning onto the street. Also, keep your mobile phones or headphones away from you at this time. Staying motionless and still allows them to make a safe crossing.

Common Mistakes to Avoid

One of the largest that is made when pedestrians use traffic lights Like crossing the road without waiting for green signal is a mistake. Very risky as a driver may not expect someone to try to cross. A wayward decision is standing too near the kerb after which ready. Stand a few feet back from the edge of the road and out of danger.

Conclusion: Safety First

Conclusion: This is how you can use a pedestrian traffic light in India. You’ll need to find the light, his its button and flash it, wait for a signal in green color then pay extra attention while crossing such intersections. Always put your safety first, it just takes a few more seconds to do something in this way and the difference is staggering. Be safe and remember safety first before speediong ganggang